NFX-400S
NFX-400S
Five axis vertical machining center machine
Advantages of multi axis machining:
The use of spherical cutters avoids cutting tool diameter points, which can prolong tool life, improve machining surface accuracy, reduce workpiece clamping errors, and shorten workpiece loading and unloading time;
No need to use special cutting tools for processing, saving tool costs, completing complex mold/part processing in one go, saving special fixture costs;
Shorten the tool length, increase cutting rigidity, and improve the cutting accuracy, quality, and efficiency of multi face machining, reducing machining processes and costs to enhance production capacity.
Advantages of multi axis machining:
The use of spherical cutters avoids cutting tool diameter points, which can prolong tool life, improve machining surface accuracy, reduce workpiece clamping errors, and shorten workpiece loading and unloading time;
No need to use special cutting tools for processing, saving tool costs, completing complex mold/part processing in one go, saving special fixture costs;
Shorten the tool length, increase cutting rigidity, and improve the cutting accuracy, quality, and efficiency of multi face machining, reducing machining processes and costs to enhance production capacity.
| Model | UNIT | NFX-400S | NFX-400 | NFX-500D |
| Stroke | ||||
| X-axis | mm | 800 | 800 | 1000 |
| Y-axis | mm | 600 | 600 | 800 |
| Z-axis | mm | 600 | 600 | 700 |
| Spindle nose to worktable（A-axis horizontal） | mm | 150-750 | 150-750 | 120-820 |
| A/C axis | ||||
| A axis range (Axis of tilt) | degree | 150°(+30~-120°) | +30~-120°（Optional±120） | |
| C axis range (Axis of rotation) | degree | 360° | ||
| A/C swing speed Max. | rev/min | 15/20 | 20/20 | 110/120 |
| A/C axis Segmentation Accuracy | sec | 45/15 | ±5 | |
| A/C axis Repositioning Accuracy | sec | 8/6 | 4 | |
| Worktable | ||||
| Table size/T-slot size | mm | Ø400/12H7 | Ø500/12H8 | |
| Load(Max.)（Horizontal 0～45°） | kg | 200 | 350 | |
| Load(Max.)（tilt45～90°） | kg | 150 | 300 | |
| Max.Dia. workpiece rotation | mm | Ø540 | Ø630 | Ø700 |
| Feedrate | ||||
| Rapids on X/Y/Z axis | m/min | 36/36/36 | 36/36/36 | 30/30/30 |
| Cutting Feedrate | mm/min | 1-20000 | 1-20000 | 1-20000 |
| Spindle | ||||
| Speed | rpm | 12000（Optioanl 16000、20000） | ||
| Drive type | D-D（OptioanlMotorized Spindle） | |||
| Taper | #ISO | BBT40（OptioanlHSK-A63） | ||
| Motor Power | kw | 11/15 | ||
| ATC | ||||
| Capacity | set | 24/32(Optioanl) | ||
| Max tool diameter(full) | mm | 78 | ||
| Max tool diameter(no adjacent tools) | mm | 120 | ||
| Max. Tool Length | mm | 300 | ||
| Max. Tool Weight | kg | 8 | ||
| Type | Arm type | |||
| Machine Accuracy [Laser measurement] Environmental requirement：Within 12 hours before the test,The ambient temperature change of the machine shall not be more than 4℃.The temperature changed of the environment shall not more than 2℃ when the machine on testing. | ||||
| Three-axis laser positioning（JISB 6338Field measurement method/Check Note1） | ||||
| Positioning Accuracy(Full Stroke) | mm | ±0.005 | ||
| Repositioning Accuracy(Full Stroke) | mm | ±0.003 | ||
| Three-axis laser positioning（VDI/DGQ 3441Statistical method/Check Note2） | ||||
| Accuracy(P) (Full Stroke) | mm | 0.01 | 0.012 | |
| Repeatability Ps max.(Full Stroke)) | mm | 0.006 | 0.007 | |
| Oil-gas pressure system | ||||
| Capacity of cutting fluid | L | 300 | ||
| Capacity of Lubricating oil tank | L | 0.7 | ||
| Air Pressure Requirement（MIN） | kg/cm2 | 5 | ||
| Others | ||||
| Power Required | Vac | （220±10%） | ||
| KVA | 30 | |||
| phase | 3 | |||
| Hz | 50/60 | |||
| Machine Weight（Rough） | kg | 6500 | 6700 | 15000 |
| Note1:JISB6338The standard deviation is not calculated in the measured method. And the actual measured value shall prevail. Note2:VDI3441Statistical method calculated 6 standard deviations. With 99.73% quality assurance. Note3:Company reserves the right to change the content and text of the record at any time due to technical requirements. | ||||
